Menu
Your Cart
Chat on WhatsApp

Sony VAIO e Series VPCEH25EN 6 Cell 4000mAh High Quality Li-ion Replacement Laptop Battery - VGP-BPS26

Sony VAIO VPCEH25EN High Quality Replacement Laptop Battery (6 Cell, 4000 mAh, Li-ion), BPS26, VGP-BPS26
Hot
Sony VAIO e Series VPCEH25EN 6 Cell 4000mAh High Quality Li-ion Replacement Laptop Battery - VGP-BPS26
  • Availability: IN STOCK
  • Model: VPCEH25EN-BPS26
PCTECH PCTECH
54 Products Sold
1514799 Views
Based on 4 reviews. - Write a review
₹ 2,499
Including Tax: ₹ 2,499
Add to Cart
Buy Now
Add to Wish List Compare this Product

Get Longer Battery Life and Improved Laptop Performance with this High Quality Sony VAIO e Series VPCEH25EN Battery. This battery is compatible with wide range of Sony VAIO e Series Laptops.

This Sony VAIO VPCEH25EN Laptop Battery is built with 6 Lithium-ion Cells and highest Quality Components which provide Longer Life with fast charging.

Expected life of this Sony VAIO VPCEH25EN Laptop Battery is 2-3 years (500-600 charge cycles max.) This PCTECH brand battery for Sony VAIO VPCEH25EN laptops is covered in a 1 year limited warranty from PCTECH.

 

Specifications
Output Voltage10.8V / 11.1V
Output Power4000mAh
ChemistryLi-ion
No. of Cells6
Battery Life500-600 Re-charge Cycles approximately
ColorBlack
ConditionBrand New (Box Packed)
Warranty1 Year Manufacturer Warranty
Compatible Part NumbersBPS26                       VGP-BPS26                  VGP-BPS26A                  BPL26                     VGP-BPL26
Compatible LaptopsSony VAIO VPCEH25EN Series laptops.

 

IMPORTANT Tips about Sony VAIO VPCEH25EN Laptop Battery:

  • New Sony VAIO VPCEH25EN Replacement Laptop Battery comes in discharged/ partially charged state and it should go through 2-3 charge/ discharge cycles to achieve its optimum efficiency.
  • When charging a new Sony VAIO VPCEH25EN battery your computer power meter may indicate that charging is complete after a few minutes, don’t worry about it and just remove the battery and install it again and repeat the charging procedure.
  • It is important to fully charge and fully discharge rechargeable laptop batteries after every 2 weeks, failing to do so may decrease battery’s life.
  • If laptop battery will not be in use for long time then it is recommended that you should remove it from the device and store it in a cool, dry and clean place.

Sony VAIO VPCEH25EN Battery Troubleshooting Tips:

Sony VAIO VPCEH25EN Battery is not charging at all or showing that it is not compatible

The problem may be with the computer BIOS and an update is required for the laptop to recognize and fully charge the laptop battery. The current software in your laptop is only set up to read an OEM (Original Equipment Manufacturer) battery. If your BIOS has not been updated, and you have only used Original batteries in your laptop, it can cause the replacement battery not to communicate correctly with the software in your system.

Check your manufacturer’s website for possible system BIOS upgrades for your laptop model. Some laptops have been prone to reject third party batteries if they have an old BIOS version installed. Once completing the BIOS upgrade, please recharge your battery for 12 hours and use as normal.

Sony VAIO VPCEH25EN Battery stops charging before it is fully charged

New batteries come in a discharged condition and must be fully charged before use. It is recommended that you fully charge and discharge the new battery four to five times to allow it to reach its maximum rated capacity.

It is generally recommend an overnight charge (approximately twelve hours). It is normal for a battery to become warm to the touch during charging and discharging.

Sony VAIO VPCEH25EN Battery stops charging whenever it reaches 96-98%

You might need to recalibrate your laptop for the new battery. You can easily recalibrate your laptop properly via the Windows Power Management.

With Windows XP, you can change the battery settings by navigating to Control Panel > Performance and Maintenance > Power Options. Once you find it change the “Power Schemes” to “Always On”. Under “Alarms”, uncheck “Low battery alarm” and “Critical battery alarm”. Under “Hibernate”, uncheck “Enable hibernation”, and then click on Apply.

This is the only time that we recommend taking the battery all the way down to zero %. You should also unplug the ac adapter and let the battery drain all the way down until your laptop shuts off. After that, plug the ac adapter back and charge it to 100%. You may need to repeat this process about 2-3 times before it actually reaches 100%.

Sony VAIO VPCEH25EN Battery shows that it is fully charged, but it is not working

This is known as "False Peak" and is very common condition during first time battery use (or using a battery that has been discharged for several months). The charger light may go out after only 10-15 minutes, indicating that it is fully charged when it is not. Should this happen, simply leave the battery on the charger for about an hour. Remove the charger, and plug-in the charger immediately. The battery will resume normal charging and the charger light will indicate when the battery is ready for use. This may happen several times during the first battery charge. Don't worry; it's perfectly normal.

Sony Laptop Battery Error: “Battery is not for this model, not detected, not compatible, or not connected.”

Some Sony laptops have a pre-installed utility called Sony ISB, which prevents the laptop from using a third-party laptop battery. To remove the Sony ISB utility, follow the directions below:

1- Turn off the computer and remove the battery.

2- Make sure only the AC adapter is connected and turn on the computer.​​

3- Click the Start button, click All Programs , click Accessories , and then click Run .

4- In the Run window, type MSCONFIG and then press the Enter key.

NOTE: If prompted for an administrator password or a User Account Control prompt is displayed, type the appropriate password, click Continue or click Yes .

5- In the System Configuration window, click the Startup tab.

6- On the Startup tab, click to uncheck the box in front of ISB Utility

7- Click the OK button.

8- In the System Configuration window, Click the Restart button

9- Turn off the computer, reconnect the battery and turn the computer back on.

This will remove the software check that Sony has placed on its laptops to prevent third-party laptop batteries from being used and allow you to use a non-Sony laptop battery. Some Sony laptops have a hardware laptop battery lock which will prevent a third-party laptop battery from being used. In that case, there is no "fix" to get around the hardware lock and you will have to buy a genuine Sony brand laptop battery only.

Sony Laptop Battery Status: “Plugged in, not charging”

If you are getting the “Plugged in, not charging” status on your laptop battery, please following the steps below:

  1. Shutdown laptop
  2. Unplug AC adapter
  3. Remove battery
  4. Plug in AC adapter
  5. Turn on laptop, allow operating system (OS) to boot
  6. Once logged in to the machine, perform a normal shut down
  7. Unplug AC adapter
  8. Replace battery
  9. Plug in AC adapter
  10. Turn on laptop, allow OS to boot.

Status should now say, “Plugged in and charging”

LAPTOP BATTERY SPECIFICATIONS
Battery BrandPCTECH

PCTECH Product Specific Return Policies

Our Product Specific Return Policy explains the applicable replacement, refund, and service conditions for different categories of products purchased from PCTECH.

The applicable return period depends on the product category and the nature of the issue reported. Customers are requested to inspect and test products promptly after delivery and follow the applicable requirements described below.

MANDATORY UNBOXING VIDEO & INSTALLATION RECORD
MANDATORY REQUIREMENT

Customers are required to record a clear, continuous, and complete video from the moment the package is received, through the unboxing process, product inspection, and initial testing or installation wherever applicable.

This video is not limited to warranty claims. It serves as an important record of safe delivery, the condition of the product at the time of receipt, proper handling, testing, and installation.

The purpose of the unboxing and installation video is to establish a clear and verifiable record of the product from the time it is delivered until it is opened, inspected, connected, tested, and installed.

For technical spare parts, the video can also help establish how the product was handled and installed before any subsequent issue is reported.

Customers should not open, install, modify, dismantle, or otherwise alter a technical spare part before recording the required unboxing evidence.

The recording should clearly capture the following:

  • The package immediately after delivery.
  • The courier or shipping label and tracking information.
  • The complete external condition of the package before opening.
  • Any dents, tears, punctures, crushing, watermarks, or other visible packaging damage.
  • The complete process of opening the package.
  • All protective packaging, bubble wrap, foam, boxes, seals, and other materials.
  • The product immediately after it is removed from the packaging.
  • The product labels, part number, serial number, connectors, and physical condition wherever applicable.
  • Any visible damage, defect, missing component, or discrepancy.
  • The initial connection, testing, or installation process wherever applicable.
  • The condition and functioning of the product during initial testing.
  • A continuous recording without unexplained interruptions wherever possible.

The original packaging and protective materials should be retained until the product has been fully inspected, tested, and the applicable return or warranty period has passed.

In the event of a dispute regarding delivery condition, transit damage, missing items, product condition, handling, installation, or a subsequent return or warranty claim, the unboxing and installation video may be requested as evidence for assessment.

Failure to maintain the required video evidence may make it difficult to establish the condition of the product at the time of delivery or determine when damage occurred.

Product Specific Return Policies

The following return and replacement periods apply according to the product category and the type of issue reported.

Category Defective or Damaged Item Not as Described
Computers 10 Days Free Replacement 10 Days Replacement / Refund
Computers / Laptop Accessories 10 Days Free Replacement 10 Days Replacement / Refund
Computer / Laptop Spare Parts 10 Days Free Replacement 10 Days Replacement / Refund
Technical / Engineering Services 30 Days Free Service for the Same Issue N/A

Important: The applicable return or replacement period depends on the product category and the nature of the reported issue. Customers should report the issue within the applicable period and provide the information or evidence requested by PCTECH.

↑ Back to Return Policy Contents

Item Not as Described

Our "Item Not as Described" policy ensures that customers receive products that match the description provided at the time of purchase.

If a customer receives an item that does not meet the described specifications, features, or condition, the following policy applies:

1. Eligibility

The policy is applicable to all eligible purchases where the product received significantly differs from its description.

Color, shape and part numbers of items like battery chargers, batteries, keyboards and screens etc. are not treated as "item not as described" until its technical specifications are totally different.

2. Notification

Customers must notify our customer support within a specified time frame, depending upon category, to report the issue and initiate the resolution process.

3. Verification

Our customer support team may request additional information, such as photographs, detailed descriptions, or any other evidence that supports the claim of the item not being as described.

4. Resolution Options

Depending on the circumstances, the following options may be provided to the customer:

a. Replacement

The customer may be eligible for a replacement of the product with one that matches the description originally provided.

b. Refund

If a replacement is not feasible, we may refund for the item.

Important: Replacement or refund will not be applicable if the returned item is found to be damaged due to mishandling during installation or removal, improper use, or negligence.

Customers are advised to approach an expert technician for installation of spare parts, handle products carefully and follow the usage guidelines to ensure eligibility for returns or replacements.

5. Return Process

If the item needs to be returned, our customer support team will provide instructions for the return shipment, including any applicable shipping labels or arrangements for pick-up.

6. Condition of Return

The customer may be required to return the item in its original condition, packaging, and with all accessories included.

7. Evaluation and Final Decision

Once the returned item is received, our returns department will evaluate its condition to verify the claim.

Based on the evaluation, the final decision regarding the resolution, replacement or refund, will be made.

↑ Back to Return Policy Contents

In-Transit Damage

Products may occasionally sustain damage during the transit process. To ensure a smooth resolution process for in-transit damage claims, customers are required to provide the mandatory unboxing video as evidence.

The unboxing video allows PCTECH to visually assess the condition of the package and its contents upon arrival. It helps establish a clear timeline and provides valuable evidence regarding how the item was packaged, handled, and the extent of any damage incurred during transportation.

Mandatory Requirement: Customers must record the package and product condition from the beginning of the unboxing process. The recording should be continuous and should clearly show the condition of the package before it is opened.

Where transit damage is suspected, customers should immediately document the damage and retain the complete original packaging, including all protective materials.

The unboxing video may be required for assessment of an in-transit damage claim and may assist PCTECH in determining the appropriate resolution.

↑ Back to Return Policy Contents

Mandatory Unboxing Video Instructions

The following steps should be followed when creating the mandatory unboxing video.

1. Start from the Initial Unboxing

Begin recording the video from the moment you receive the package.

Capture the exterior condition of the packaging, highlighting any signs of damage, such as dents, tears, punctures, crushing, watermarks, or other visible damage.

2. Document the Unpacking Process

Record the step-by-step process of opening the package, emphasizing the care taken while removing any protective materials or seals.

Be sure to capture any visible damage or indications of mishandling.

3. Focus on the Product

Provide clear footage of the product after it has been removed from the packaging.

Capture the product from different angles where necessary and clearly record any visible damage, defects, missing components, labels, part numbers, connectors, or other relevant details.

4. Preserve the Packaging

Retain the original packaging, including any bubble wrap, foam inserts, boxes, seals, or other protective materials used during shipping.

This helps provide a comprehensive view of how the product was packaged and the level of protection provided during transportation.

5. Maintain a Continuous Recording

Try to maintain an uninterrupted recording throughout the unboxing process to ensure transparency and avoid any doubts regarding the sequence of events.

6. Record Initial Testing

Where applicable, continue the recording through the initial testing of the product.

For technical spare parts, customers should record the initial connection or testing process wherever practical and appropriate.

7. Record Installation Where Applicable

For products requiring technical installation, customers are encouraged to maintain a clear record of the installation and initial testing process.

This is particularly important for technical spare parts such as laptop screens, laptop batteries, keyboards, adapters, DC jacks, hinges, and other components requiring removal of existing parts or technical installation.

Important: The purpose of maintaining the unboxing and installation record is to establish a clear history of the product's condition from delivery through inspection, testing, and installation.

↑ Back to Return Policy Contents

Installation and Handling Responsibility

Technical spare parts are not necessarily plug-and-play products.

Many laptop and computer spare parts require technical knowledge, specialist tools, proper handling, and professional installation.

Customers are strongly advised to approach an expert technician for installation of technical spare parts.

Customers are responsible for ensuring that products are handled and installed correctly.

Replacement or refund will not be applicable if the returned item is found to be damaged due to:

  • Mishandling during installation
  • Mishandling during removal
  • Improper use
  • Negligence
  • Incorrect installation
  • Incorrect connection
  • Use of inappropriate tools
  • Physical force applied to the product or connector
  • Other installation-related damage

Customers should handle products carefully and follow appropriate installation and usage procedures to help ensure eligibility for applicable returns or replacements.

Laptop Screen Installation

Laptop LCD screens are particularly delicate components. The LCD panel, display cable, connector, mounting points, and surrounding assembly can be damaged during installation or removal.

Professional installation is strongly recommended for laptop screen replacements.

Laptop Battery Installation

Laptop batteries may contain sensitive electronic circuits and connectors. Incorrect installation, short circuits, physical damage, or improper handling can damage the battery or the laptop.

Professional installation is recommended wherever technical expertise is required.

Other Technical Spare Parts

The same principle applies to keyboards, adapters, DC jacks, hinges, motherboards, cooling components, and other technical spare parts that require dismantling or installation.

↑ Back to Return Policy Contents

Return Evaluation and Final Decision

Once a returned item is received, the returns department may evaluate the product and its condition to verify the reported issue.

The evaluation may include inspection of the product, packaging, accessories, labels, part numbers, physical condition, and other relevant evidence.

The submitted photographs, videos, unboxing recording, installation record, order details, and other information may also be reviewed where applicable.

Evaluation of Item Not as Described Claims

For an "Item Not as Described" claim, PCTECH may compare the product received against the product description and specifications applicable at the time of purchase.

Differences in colour, shape, appearance, or part number alone will not necessarily qualify as an "Item Not as Described" claim where the technical specifications remain the same or substantially consistent with the product description.

Evaluation of Damage Claims

For damage-related claims, PCTECH may evaluate whether the reported damage was present when the product was received or whether it may have occurred after delivery, including during handling, installation, removal, testing, or use.

Final Decision

Based on the evaluation, the final decision regarding the applicable resolution, including replacement, refund, or service where applicable, will be made according to the applicable Product Specific Return Policy and the circumstances of the claim.

Important: The availability of a replacement or refund does not mean that every reported issue automatically qualifies. Eligibility is subject to the applicable category, reporting period, condition of the returned product, verification, and final evaluation.

↑ Back to Return Policy Contents

Return Process

If you believe that the product received is defective, damaged, or significantly different from its description, contact PCTECH customer support within the applicable return period.

1 Contact Customer Support

Provide your Order ID, product name, and a clear description of the issue.

2 Provide Evidence

Provide photographs, videos, unboxing video, installation/testing record, or other evidence requested by the customer support team.

3 Initial Verification

Our customer support team may review the submitted information and request additional evidence where necessary.

4 Return Instructions

If the product needs to be returned, our customer support team will provide the applicable return shipment instructions.

5 Product Evaluation

Once received, the returned product may be inspected by our returns or technical team.

6 Resolution

Based on the evaluation, the applicable replacement, refund, or service resolution will be determined according to the relevant policy.

↑ Back to Return Policy Contents

Condition of Returned Products

Where a return is approved, the customer may be required to return the item in its original condition, packaging, and with all accessories included.

The product should not have been modified, repaired, dismantled, tampered with, or damaged after delivery.

For technical spare parts, customers should take particular care to avoid physical or installation-related damage before returning the product.

Do not send a product back without return authorization.

Customers should contact PCTECH customer support and follow the return instructions provided before shipping the product back.

↑ Back to Return Policy Contents

Packaging and Return Shipment

When a return has been authorized, customers should package the product carefully using appropriate protective materials.

Where possible, the original packaging and protective materials should be used.

The product should be protected from physical damage during the return shipment.

Customers should retain the shipment receipt and tracking details until the return process has been completed.

↑ Back to Return Policy Contents

Important Customer Notice

Please inspect your package immediately after delivery.

Record the mandatory unboxing video before opening the package and before removing or installing the product.

Do not discard the packaging until the product has been inspected and tested.

For technical spare parts, professional installation is strongly recommended.

  • Verify the product received against your order.
  • Check the package for visible damage.
  • Record the complete unboxing process.
  • Inspect the product before installation.
  • Do not install a product that appears physically damaged.
  • Verify compatibility before installing technical spare parts.
  • Use appropriate tools and installation procedures.
  • Retain the original packaging and protective materials.
  • Contact PCTECH before returning any product.
↑ Back to Return Policy Contents

Contact Us

For return, replacement, or product-related assistance, please contact PCTECH customer support.

Email: cs@pctech.co.in

Phone: +91 9810343724

Please include your Order ID and relevant product details when contacting customer support.

↑ Back to Return Policy Contents

Important Summary

Mandatory Unboxing Video: Customers must record a clear and continuous unboxing video from receipt of the package through unboxing and, where applicable, initial testing or installation. The video serves as evidence of safe delivery, product condition, handling, testing, and installation.

Defective or Damaged Products: The applicable period is 10 Days Free Replacement for Computers, Computers / Laptop Accessories, and Computer / Laptop Spare Parts.

Item Not as Described: The applicable period is 10 Days Replacement / Refund for Computers, Computers / Laptop Accessories, and Computer / Laptop Spare Parts, subject to verification and the applicable return conditions.

Technical / Engineering Services: The applicable period is 30 Days Free Service for the Same Issue.

Installation Damage: Replacement or refund will not be applicable where the returned item is found to have been damaged due to mishandling during installation or removal, improper use, or negligence.

Final Evaluation: All return, replacement, refund, and service requests are subject to verification and evaluation according to the applicable Product Specific Return Policy.

Write a review

Please login or register to review
Tags: Sony VAIO vpceh25en battery , Sony VAIO e series vpceh25en battery price , vpceh25en battery , Sony VPCEH25EN Replacement Laptop Battery , Sony VAIO VPCEH25EN Laptop Battery , Sony VAIO vpceh25en laptop battery price , Sony VAIO vpceh25en laptop battery

From the same brand

Quickview
Dell Inspiron 15 (3543) 15.6-inch HD LCD LED Laptop Screen Display (1366x768, 30 pin)
Brand: PCTECH
Dell Inspiron 15 (3543) 15.6-inch HD LCD LED Laptop Screen Display (1366x768, 30 pin)
Has the display of your Dell Inspiron 15 3543 laptop been shattered or damaged, leaving you frustrated and unable to unable to enjoy your digital..
₹ 3,499
Including Tax:₹ 3,499
Add to Cart
Add to Wish List Compare this Product
Quickview
Acer Aspire 5745G 6 Cell Compatible Laptop Battery
ORIGINAL
Brand: PCTECH
Acer Aspire 5745G 6 Cell Compatible Laptop Battery
Get Longer Battery Life and improved laptop performance with this High Quality Replacement Aspire 5745G Battery. This Acer Aspire 5745G Batt..
₹ 1,750
Including Tax:₹ 1,750
Add to Cart
Add to Wish List Compare this Product
Quickview
ASUS K42F 14-inch HD LCD LED Laptop Screen Display (1366x768, 40 Pin)
Brand: PCTECH
ASUS K42F 14-inch HD LCD LED Laptop Screen Display (1366x768, 40 Pin)
Specifications Brand Branded Size 14.0-inch Wide Screen Reso..
₹ 1,999
Including Tax:₹ 1,999
Add to Cart
Add to Wish List Compare this Product
Quickview
ASUS k55A 15.6-inch HD LCD LED Laptop Screen Display (1366x768, 40 Pin LVDS)
Brand: PCTECH
ASUS k55A 15.6-inch HD LCD LED Laptop Screen Display (1366x768, 40 Pin LVDS)
Specifications Brand Branded Size 15.6 Inch Wide Screen Reso..
₹ 2,499
Including Tax:₹ 2,499
Add to Cart
Add to Wish List Compare this Product
Quickview
ASUS X53U 15.6-inch HD LCD LED Laptop Screen Display (1366x768, 40 Pin)
Brand: PCTECH
ASUS X53U 15.6-inch HD LCD LED Laptop Screen Display (1366x768, 40 Pin)
ASUS X53U 15.6" HD LCD LED Replacement Screen (1366x768, 40-Pin): Restore Visual ClarityBring your ASUS X53U back to life with this high-qualit..
₹ 2,499
Including Tax:₹ 2,499
Add to Cart
Add to Wish List Compare this Product

The product is currently Out-of-Stock. Enter your email address and Mobile number below and we will notify you as soon as the product is available in stock.

Full name
Email address
Mobile No.
Comments